CRL Pinnacle 037 Series Chrome Wall Mount Full Back Plate Standard Hinge - Door Hinges -. Chrome 。 The CRL Pinnacle Series of professional hinges is able to accommodate /16 to 1/2 inch (8 to 12 millimeter) glass. Several different styles are available, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Pinnacle Hinges are self-centering, and contain a Reversible Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Standard Reversible Pivot Pin: Each Pinnacle Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 degrees. The opposite side is marked 8 degrees. Standard Pinnacle Hinges come with the 90 degrees side activated. Offset Models come with the Pin pre-set to 8 degrees ( degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side. Using two hinges with /16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 80 pounds (6 kilograms) with a maximum width of 28 inches (711 millimeters). Using three hinges with /16 to 1/2 inch glass (8 to 12 millimeters) the hinge will hold up to 120 pounds (4 kilograms) with a maximum width of 2 inches (81 millimeters). Specifications: Glass Thickness: /16 to 1/2 inch (8 to 12 millimeter) Tempered Safety GlassConstruction: Solid BrassHinge Swings: 90 Degrees Inwards and Outwards Closing Type: Self-Centering when within 1 Degrees of closed positionCut-Out RequiredIncludes: One Hinge, Gaskets, Screws and Template . 。 。 。